OFFICIAL Facilities and Facility Manager

[Taz D]

Originally Posted by simplelife0114

My facilities manager seems to routinely leave out some facilities (intermittent as to which ones) when I'm starting or loading. I have checked all the settings and they are fine. It takes a lot of time to scroll and find the ones not loaded to manually do them.

Hi Simplelife,
What facilities are you having to manually load? Are they always the same ones? Do those facilities have a check in the box for the facility?

If you click on the question mark for each of those it will show you what tool is needed to load it. If they are all the same tool then you may need to take that tool out of storage to a farm, click the save and then restart your farms and put it back in storage.

Make sure in the start all and load all that you are showing all the turbo tools for those. Should be 11 for start all and 2 for the load all.


The other possibility is that you have run out of something while loading your facilities. If that happens the loading can stop without completing. You can try just reloading your farms again and then try the store all, start all and load all again to see if it will complete the loading.